Note:

Ensure you have installed the latest firmware version to benefit from all available fixes.

If the problem continues, contact Kabata customer support.

Motor calibration error

• Press the dial to turn off the base.
• Connect the power adapter to the base to charge the battery.
• Remove all dumbbells and weights from the base, then check for obstructions or jammed parts.
• Press the dial to turn the base on and check if the error persists.

This issue may be caused by a low battery. Make sure the base charges for at least 10 minutes to ensure sufficient power for startup.

Motor stall error

• Press the dial to power off the base.
• Remove all weights and check the base for debris or obstructions.
• Press the dial to turn the base on (ensure no dumbbells or weights are in place).
• Rotate the dial to adjust the weight and verify normal operation.